Description of the simple: steps to edit the sheet label for scale
May 11, 2022
1. Connect the printer to the PC terminal via the USB cable.
2. Open the label editing software, select "Port Settings" in the menu bar, and select the current printer in the "USB" bar.
3. Select "Label Settings" under the menu bar "Settings" icon, and set the width and height of the label according to the label size used.The width dimensions are usually print effective width, 2 inch width of 48mm, 4 inch width of 100 and maximum height size of 100mm.
4. Variable setting.The output variables of the scale corresponding to the printer setting variables are as follows:
1). The variable output of the scale, the first variable corresponds to V 0, the second variable corresponds to V 1, and the third variable corresponds to V 2......and so on.
2) The variable format of the scale can be connected through 232 PC segment and obtained with super terminal and other tools.
3) For printer corresponding variables, click "" in the editing bar, click "Add",Add V0, V1, V2................as illustrated in following figure:
4) Each variable can assign an initial value to test the print resolution location. When the printer is connected to the scale to print, the variable will automatically obtain the output data of each scale.The number of variables can be changed from V 0 to Vn, and can be added as needed.Note: The number of added variables should be as much as possible than the number of scale variables, so as to avoid the value that the required variables can not be displayed normally because the scale device has hidden output variables.
5. Click the icon and drag to the blank space to enter the tag editing interface.Enter the desired content in the Text Content box. Note :that the nonvariables must be added in quotation marks — —, The variable does not need quotation ——.You can also edit the both together —— .Non-variables can define any required content, such as: company name, product name, date, time, batch number, etc.
6. Date and time are the printer's own variables. Just enter TD and TT directly in the "Text content" box.
Note:
Be uppercase.When the output date and time on the scale, date and time are treated as a variable.
7. Bar code and QR code content editing are the same as article 5 above.
8. Adjust the location of the content according to the needs, and layout, to achieve the desired aesthetic effect.
9. Click the test print button, print out the label, and adjust the label page as necessary.
10. Click the button to save the label to the PC end, and click the button to save the label to the printer end.Note: Save the tag to the printer end, be sure to save the tag name as autorun, no case, can save multiple tags, in order of .....autorun 1,autorun 2,autorun 3..., Select the label to print as needed
11. Connect the configured RS232 serial line to the weighing reader.additional function:
Date and time can be set as follows:
1) TD + 1Y1M1D, the current date is delayed one year one month one day, select the required delay
Date can be.
2) TT + 1h 1m 1s, the current time delay is one hour, one minute, one second, choose the delay time